1.2로 업데이트

sarojaba authored
revision 5f8f42b21372b1dce723a7256c637e581de301a6
rust-inside-other-languages
# 3.3. 다른 언어에 Rust 포함하기 (Rust Inside Other Languages) - 1%

For our third project, we’re going to choose something that shows off one of
Rust’s greatest strengths: a lack of a substantial runtime.

As organizations grow, they increasingly rely on a multitude of programming
languages. Different programming languages have different strengths and
weaknesses, and a polyglot stack lets you use a particular language where
its strengths make sense, and use a different languagone where it’s weak.

A very common area where many programming languages are weak is in runtime
performance of programs. Often, using a language that is slower, but offers
greater programmer productivity, is a worthwhile trade-off. To help mitigate
this, they provide a way to write some of your system in C, and then call
theat C code as though it were written in the higher-level language. This is
called a ‘foreign function interface’, often shortened to ‘FFI’.

Rust has support for FFI in both directions: it can call into C code easily,
but crucially, it can also be called _into_ as easily as C. Combined with
Rust’s lack of a garbage collector and low runtime requirements, this makes
Rust a great candidate to embed inside of other languages when you need
somethat extra oomph.

There is a whole [chapter devoted to FFI][ffi] and its specifics elsewhere in
the book, but in this chapter, we’ll examine this particular use-case of FFI,
with three examples, in Ruby, Python, and JavaScript.

[ffi]: ffi.html

# The problem

There are many different projects we could choose here, but we’re going to
pick an example where Rust has a clear advantage over many other languages:
numeric computing and threading.

Many languages, for the sake of consistency, place numbers on the heap, rather
than on the stack. Especially in languages that focus on object-oriented
programming and use garbage collection, heap allocation is the default. Sometimes
optimizations can stack allocate particular numbers, but rather than relying
on an optimizer to do its job, we may want to ensure that we’re always using
primitive number types rather than some sort of object type.

Second, many languages have a ‘global interpreter lock’ (GIL), which limits
concurrency in many situations. This is done in the name of safety, which is
a positive effect, but it limits the amount of work that can be done at the
same time, which is a big negative.

To emphasize these two aspects, we’re going to create a little project that
uses these two aspects heavily. Since the focus of the example is theo embedding
of

Rust into other languages, rather than the problem itself, we’ll just use a
toy example:

> Start ten threads. Inside each thread, count from one to five million. After
> Aall ten threads are finished, print out ‘done!’.

I chose five million based on my particular computer. Here’s an example of this
code in Ruby:

```ruby
threads = []

10.times do
threads << Thread.new do
count = 0

5_000_000.times do
count += 1
end

count
end
end

threads.each {|t| t.join }do |t|
puts "Thread finished with count=#{t.value}"
end

puts "done!"
```

Try running this example, and choose a number that runs for a few seconds.
Depending on your computer’s hardware, you may have to increase or decrease the
number.

On my system, running this program takes `2.156` seconds. And, if I use some
sort of process monitoring tool, like `top`, I can see that it only uses one
core on my machine. That’s the GIL kicking in.

While it’s true that this is a synthetic program, one can imagine many problems
that are similar to this in the real world. For our purposes, spinning up somea few
busy threads represents some sort of parallel, expensive computation.

# A Rust library

Let’s rewrite this problem in Rust. First, let’s make a new project with
Cargo:

```bash
$ cargo new embed
$ cd embed
```

This program is fairly easy to write in Rust:

```rust
use std::thread;

fn process() {
let handles: Vec<_> = (0..10).map(|_| {
thread::spawn(|| {
let mut _x = 0;
for _ in (0..5_000_0010) {
_x += 1
}
})
}).collect();

for h in handles {
h.join().ok().expect("Could not join a thread!");
}
println!("Thread finished with count={}",
h.join().map_err(|_| "Could not join a thread!").unwrap());
}
println!("done!");

}
```

Some of this should look familiar from previous examples. We spin up ten
threads, collecting them into a `handles` vector. Inside of each thread, we
loop five million times, and add one to `_x` each time. Why the underscore?
Well, if we remove it and compile:

```bash
$ cargo build
Compiling embed v0.1.0 (file:///home/steve/src/embed)
src/lib.rs:3:1: 16:2 warning: function is never used: `process`, #[warn(dead_code)] on by default
src/lib.rs:3 fn process() {
src/lib.rs:4 let handles: Vec<_> = (0..10).map(|_| {
src/lib.rs:5 thread::spawn(|| {
src/lib.rs:6 let mut x = 0;
src/lib.rs:7 for _ in (0..5_000_001) {
src/lib.rs:8 x += 1
...
src/lib.rs:6:17: 6:22 warning: variable `x` is assigned to, but never used, #[warn(unused_variables)] on by default
src/lib.rs:6 let mut x = 0;
^~~~~
```

That first warning is because we are building a library. If we had a test
for this function, the warning would go away. But for now, it’s never
called.

The second is related to `x` versus `_x`. Because we never actually _do_
anything with `x`, we get a warning about it. In our case, that’s perfectly
okay, as we’re just trying to waste CPU cycles. Prefixing `x` with the
underscore removes the warning.

Finally, we join on each thread.

Right now, however, this is a Rust library, and it doesn’t expose anything
that’s callable from C. If we tried to hook this up to another language right
now, it wouldn’t work. We only need to make two small changes to fix this,
though. The first is to modify the beginning of our code:

```rust,ignore
#[no_mangle]
pub extern fn process() {
```

We have to add a new attribute, `no_mangle`. When you create a Rust library, it
changes the name of the function in the compiled output. The reasons for this
are outside the scope of this tutorial, but in order for other languages to
know how to call the function, we need to nocan't do that. This attribute turns
that behavior off.

The other change is the `pub extern`. The `pub` means that this function should
be callable from outside of this module, and the `extern` says that it should
be able to be called from C. That’s it! Not a whole lot of change.

The second thing we need to do is to change a setting in our `Cargo.toml`. Add
this at the bottom:

```toml
[lib]
name = "embed"
crate-type = ["dylib"]
```

This tells Rust that we want to compile our library into a standard dynamic
library. By default, Rust compiles an ‘rlib’, a Rust-specific format.

Let’s build the project now:

```bash
$ cargo build --release
Compiling embed v0.1.0 (file:///home/steve/src/embed)
```

We’ve chosen `cargo build --release`, which builds with optimizations on. We
want this to be as fast as possible! You can find the output of the library in
`target/release`:

```bash
$ ls target/release/
build deps examples libembed.so native
```

That `libembed.so` is our ‘shared object’ library. We can use this file
just like any shared object library written in C! As an aside, this may be
`embed.dll` or `libembed.dylib`, depending on the platform.

Now that we’ve got our Rust library built, let’s use it from our Ruby.

# Ruby

Open up an `embed.rb` file inside of our project, and do this:

```ruby
require 'ffi'

module Hello
extend FFI::Library
ffi_lib 'target/release/libembed.so'
attach_function :process, [], :void
end

Hello.process

puts "'done!'
```

Before we can run this, we need to install the `ffi` gem:

```bash
$ gem install ffi # this may need sudo
Fetching: ffi-1.9.8.gem (100%)
Building native extensions. This could take a while...
Successfully installed ffi-1.9.8
Parsing documentation for ffi-1.9.8
Installing ri documentation for ffi-1.9.8
Done installing documentation for ffi after 0 seconds
1 gem installed
```

And finally, we can try running it:

```bash
$ ruby embed.rb
done!
$
```

Whoa, that was fast! On my system, this took `0.086` seconds, rather than
the two seconds the pure Ruby version took. Let’s break down this Ruby
code:

```ruby
require 'ffi'
```

We first need to require the `ffi` gem. This lets us interface with our
Rust library like a C library.

```ruby
module Hello
extend FFI::Library
ffi_lib 'target/release/libembed.so'
```

The `ffi` gem’s authors recommend using a module to scope the functions
we’ll import
Hello` module is used to attach the native functions from the shared
library. Inside, we `extend` the necessary
`FFI::Library` module, and then call
`ffi_lib` to load up our shared
object library. We just pass it the path that
our library is stored,
which, as we saw before, is
`target/release/libembed.so`.

```ruby
attach_function :process, [], :void
```

The `attach_function` method is provided by the FFI gem. It’s what
connects our `process()` function in Rust to a Ruby function of the
same name. Since `process()` takes no arguments, the second parameter
is an empty array, and since it returns nothing, we pass `:void` as
the final argument.

```ruby
Hello.process
```

This is the actual call into Rust. The combination of our `module`
and the call to `attach_function` sets this all up. It looks like
a Ruby function, but is actually Rust!

```ruby
puts "'done!"'
```

Finally, as per our project’s requirements, we print out `done!`.

That’s it! As we’ve seen, bridging between the two languages is really easy,
and buys us a lot of performance.

Next, let’s try Python!

# Python

`embed.py`파일을 만들고 다음의 코드를 입력합니다:

```python
from ctypes import cdll

lib = cdll.LoadLibrary("target/release/libembed.so")

lib.process()

print("done!")
```

아주 쉽죠! `ctypes`모듈로부터 `cdll`을 사용할 수 있습니다. `LoadLibrary`를 호출한 뒤, `process()`를 호출할 수 있습니다.

제가 테스트한 환경에서, `0.017`초가 걸렸군요. 빨라요!

# Node.js

Node isn’t a language, but it’s currently the dominant implementation of
server-side JavaScript.

In order to do FFI with Node, we first need to install the library:

```bash
$ npm install ffi
```

After that installs, we can use it:

```javascript
var ffi = require('ffi');

var lib = ffi.Library('target/release/libembed', {
'process': [ 'void', [] ]
});

lib.process();

console.log("done!");
```

It looks more like the Ruby example than the Python example. We use
the `ffi` module to get access to `ffi.Library()`, which loads up
our shared object. We need to annotate the return type and argument
types of the function, which are '`void'` for return, and an empty
array to signify no arguments. From there, we just call it and
print the result.

On my system, this takes a quick `0.092` seconds.

# 결론

보시다시피, 다른 언어에 rust를 포함하는 것은 기본적으로 _매우_ 쉽습니다.
물론 여기서부터 해볼만한 더 많은 것들이 있지만요. 더 자세히 알아보고 싶다면
[FFI][ffi]챕터를 참고해주세요.